QSC E15 Passive Loudspeakers Full-Range ตู้ลำโพง 2 ทาง ขนาด 15 นิ้ว 500 วัตต์ ตอบสนองความถี่ 55Hz - 20kHz

 

The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

-----------------------------------------------------------

Features :

• High output, professional quality sound with E15 – 500 W continuous power

• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

• Titanium diaphragm for high fidelity and long life

• Rugged tour-grade textured paint

• Foam-lined perforated steel grill

• Available U-Style Yoke and M8 rigging kit for permanent installation

• Dual angle pole socket

-----------------------------------------------------------

Specification

ModelE15

Configuration1 x 15-inch, 2-way, non-powered 

Frequency Range (-6 dB)55Hz – 20kHz

Power capacity²: continuous/peak500 W / 2000 W

Sensitivity 97dB, 1W@1m

Coverage Angle75° conical DMT

Output (peak SPL @ 1 m)130dB

Drivers

LF

HF

 

381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil

38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver 

Nominal Impedance8Ω

Cross-overFull-range only 1.55kHz 

Input connectors 2x NL4, 1 x barrier strip

Enclosure Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.

Mounting and suspension 6 x M8 suspension points, dual angle, 35mm pole-socket

Net weight31 kg / 68 lbs

Shipping weight34 kg / 75 lbs 

Dimensions
(WxHxD) 

 420x716x445mm

16.5x28.2x17.5in