QSC E10 Passive Loudspeakers Full-Range ตู้ลำโพง 2 ทาง ขนาด 10 นิ้ว 300 วัตต์ ตอบสนองความถี่ 68Hz - 20kHz

 

The E10 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s DMT (Directivity Matched Transition) design with a wide 85° coverage. When used as a stage monitor, the E10 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

-----------------------------------------------------------

 

Features :

• High output, professional quality sound with 300 W continuous power

• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.

• Rugged tour-grade textured paint

• Foam-lined perforated steel grill

• Suitable for main PA and stage monitor

• Available U-Style Yoke and M8 rigging kit for permanent installation

• Dual angle pole socket

-----------------------------------------------------------

Specification

ModelE10

Configuration1 x 10-inch, 2-way, non-powered 

Frequency Range (-6 dB)68Hz – 20kHz

Power capacity²: continuous/peak300 W / 1200 W

Sensitivity95dB, 1W@1m

Coverage Angle85° conical DMT

Output (Peak SPL @ 1m)126dB

Drivers

LF

HF

 

254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;

25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver 

Nominal Impedance8Ω

Cross-overFull-range only, 1.8kHz

Input Connections2x NL4, 1x barrier strip

EnclosureMulti-angle plywood, black texture pain finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.

Mounting and suspension6 x M8 suspension points, dual angle, 35mm pole-socket

Net weight20kg / 44lbs

Shipping weight23kg / 50lbs

Dimensions
(WxHxD) 

330x560x330mm

13x22x13 in