BARIX Annuncicom 100 Annuncicom 100 : IP Audio device designed to serve as a gateway between IP based VoIP, Paging, Intercom systems and traditional systems or call boxes, loudspeakers and microphones

FUNCTIONALITY

IP Paging and Intercom device with mic/speaker and line level interfaces. 2W output power into 8 Ohm, contact closure inputs and relay output. Useable as paging gateway, small zone device and Intercom device.

APPLICATIONS

• VHF Radio Controller and interface to IP

• Microphone Encoder for IP Audio Surveillance

• Door Intercom Controller, VoIP based

• Help Point/SOS call box device

• Classroom VoIP device with built-in amplifier, talkback, serial port

• Paging and Audio Distribution with Amplifier control and monitoring

• Generic, bidirectional full-duplex VoIP module for Paging and Intercom Applications

• Live IP Audio Encoder for Streaming Applications

• Digital Annunciator, Message Player, Message Repeater

• SIP and IP Paging Zone Device

FEATURES

• MP3, G.711, G.722*, PCM Encoding

• MP3, G.711, G.722*, PCM Decoding

• Shoutcast/Icecast Source capability

• Audio Level Supervision with SNMP Trap generation

• IP Streaming via TCP, UDP, RTP, Multicast

• Microphone Input

• Line Level Input

• Line Level Output

• Amplified Output 2W (8Ohm)

• Relay Output (1)

• Contact Closure Input (2)

• RS-232 Serial Port (1)

• RS-485 Serial Port (1)

• Supply Voltage (16..30VDC or 48VDC)

Designed in Switzerland and installed in tens of thousands of locations worldwide, the Barix Audio Devices are the established standard for VOIP and Audio over IP applications alike.

* Hardware revision 2 only

Annuncicom 100

Electrical
•    9 to 30 VDC, 12 to 24 VAC, 8 Watt max. on screw
terminal block and 2.1mm barrel connector 

Ethernet
•    10/100Mbps auto,
•    RJ-45 connector with integrated Link/Activity LED
•    Protocols: TCP/IP, UDP, RTP, SIP, DHCP, 
Multicast  capable

Microphone Input
•    On detachable screw terminal block and 3.5 mm (1/8") Jack
•    3 pin TRS, with bias power 2.7VDC

Analog Line Input (mono)
•    Line level input, 2k Ohm input impedance on RCA
2.2 VPP max, adjustable in sensitivity
•    Frequency response 20 Hz .. 20 kHz (-3dB)*
•    Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)*

RS-232 and RS-485 Interfaces
•    On 9-pin Sub-D connector
•    300..230'400 Baud asynchronous, tunneling or local control

MTBF
•    calculation 560 000h (according to MIL217F at 25°C)

Mechanical
•    Aluminum case, 390 g
•    Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
•    rack and wall mountable using accessories

* depends on used codec, best results @48kHz PCM

Analog Line Output (mono)
•    Line level output, 40..60 Ohm output impedance on RCA
•    Output level software controllable
•    Full scale output voltage: 3 dBu, 3 VPP
•    Frequency response 20 Hz .. 20 kHz (-3dB)*
•    Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS)* 

Speaker out
•    On detachable screw terminal block
•    Suggested speaker impedance 4 to 32 Ohm
•    1 Watt max @ 8 Ohm (2 W max @ 4 Ohm)
•    Frequency response 20 Hz .. 20 kHz (-3dB)*,
•    Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*

Audio formats
•    MP3, encoding/decoding up to 192/320 kbps
•    PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
•    MP3, VBR, CBR* / VBR, CBR* encoding/decoding
•    PCM, G.711, G.722* encoding/decoding

Model comparison
•    Model 60 (48 VDC) , PoE, 5 Watt
•    Model 100 (9..30 VDC 12..24 VAC) USB 2 Watt
•    Model 155 (24..48 VDC) 5.5 Watt
•    Model 200 (16..30 VDC, 48 VDC, 16..24 VAC) PoE, USB, Aipohne 8 Watt
•    Model 1000 (24..48 VDC)

Discrete I/O
•    On detachable screw terminal block
•    1 relay output with normally closed and open contacts,
•    30V 0.5A (AC & DC)
•    2 discrete / dry contact inputs