QSC AD-S6T Surface Mount Speaker 2-way ตู้ลำโพงติดผนังขนาด 6.5 นิ้ว สองทาง  150วัตต์ ช่วงย่านความถี่ 60 Hz – 20 kHz

มีสีขาวและดำ

รหัส สีดำ    = QSC AD-S6T-B

รหัส สีขาว  = QSC AD-S6T-W

AcousticDesign™ series offers integrators a premium quality installed sound solution where performance, coverage, and aesthetics are paramount. Combined with unprecedented ease-of-installation and high weather resistance, the AcousticDesign™ series provides integrators a versatile and confident install solution over a wide variety of foreground and background sound reinforcement applications.

 

Consistent and even axisymmetric (conical) coverage is achieved through DMT™ (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point. The result is a coherent transition between transducers and improved off-axis response.

 

AcousticDesign™ models with (T) suffix feature low-loss, low-saturation transformers with selectable taps, including an 8Ω bypass. To enhance weather resistance, the rotary selector is located on the back of the enclosure, protected by a weather grommet.

 

With rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles for weather resistance, the AcousticDesign™ surface mounted series exceed IEC60529 IP-54 ratings for dust and splash resistance.

 

Installers will appreciate the award-winning X-Mount™ system included with each full-range AcousticDesign™ model. This ingenious mounting solution achieves unprecedented ease-of-installation in horizontal, vertical, wall, or ceiling deployments. Knurled surfaces at the pivot planes ensure the load will not drift or sag over time.  Articulation marks allow pre-configuration of the X-Mount™ while on the ground with no special tools required. Once secure, the loudspeaker installs in seconds, allowing the installer to work safer, smarter, and faster with repeatable results.

 

To further enhance performance and speed of install with optimum result, advanced voicing filter sets using QSC Intrinsic Correction™ techniques are obtainable using Q-Sys networked audio processing platforms, including CXD amplifiers for a complete QSC systems solution.

 

The AcousticDesign™ series feature a stylish appearance free of obtrusive logo adornments for aesthetically sensitive installations. Complimenting adjacent product families, AcousticDesign™ surface loudspeakers are available in QSC standard black (RAL 9011) or white (RAL 9010) and may be painted to match any decor.

• ลำโพง ขนาด 6.5 นิ้ว 

• การตอบสนองย่านความถี่ 60 Hz – 20 kHz

• Maximum SPL : 116 dB SPL

• Coverage angle (-6 dB) 105°

----------------------------------------------------------

Features

• 6” weather treated woofer; 1” silk dome tweeter

• 105° Axisymmetric (conical) coverage

• 60 watt low-saturation and low-loss 70/100V transformers with 8Ω bypass

• Maximum peak SPL 116 dB (8 ohm bypass)

• DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area

• X-Mount™ system  enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over time

• Advanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-Sys processing or CXD amplifier platforms

• Lightweight ABS enclosures offer long-term durability and lasting good looks

• Sealed input panel cover and powder coated aluminum grilles for added weather resistance

• Meets IEC60529 IP-54 for dust and splash resistance

• Available in black (RAL 9011) or white (RAL 9010)

• Complete EASE, CF2, CAD, and BIM information available online

----------------------------------------------------------

AD-S6T Specifications

 

System DetailsAD-S6T

Effective frequency range160 Hz to 20 kHz

Rated noise power / voltage2150 watts / 35 volts (rms)

Broadband sensitivity389 dB SPL

Coverage angle (-6 dB)105°

Directivity factor (Q)5

Directivity Index7 dB

Maximum continuous SPL4110 dB

Maximum peak SPL4116 dB

Rated impedance8 ohms

Recommended amplifier power (loudspeaker "program" power)300 watts

Transformer taps70 V: 60, 30, 15, 7.5 W and 8Ω bypass

100V: 60, 30, 15 W and 8Ω bypass

HF transducer1” silk dome tweeter / 1” voice coil, horn loaded

LF transducer6” weather resistant paper cone woofer

1.5” / 38 mm voice coil

Input connector typeEuroblock connector with parallel output

Enclosure materialPainted ABS polymer

Grille materialPowder coated aluminum

X-Mount materialPowder coated aluminum

Ingress protectionIP-54

Operating environmentDesigned for indoor and outdoor use

TestingThe AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C

Operating Temperature Range-20 to 50° C / -4 to 122° F

Net weight13.6 lb / 6.2 kg

Product dimensions14.4” × 8.5” × 8.5” (365 × 215 × 215 mm)

Shipping weight33.4 lb / 15.2 kg (pair packed)

Shipping dimensions20" × 12” × 23” (510 × 305 × 585 mm) (pair packed)

Included accessoriesX-Mount mounting system, Euroblock connector,
input panel cover

Optional accessories 

 1 Free-field, -10 dB from on-axis sensitivity

 2 IEC60268-1 noise signal for 2 hours

 3 On-Axis, free-field sensitivity, 2.83V, 1 m

 4 Calculated from rated noise voltage and sensitivity