YAMAHA EMX5 เพาเวอร์มิกเซอร์ 2 x 500 วัตต์ Portable Powered Mixers

    มีสินค้าพร้อมส่ง   

EMX5 เพาเวอร์มิกเซอร์

Box-type robust and portable powered mixer featuring high efficiency power amplifier of 630W and mixer with comprehensive effects, 1-Knob Master EQ™ and built-in feedback suppressor.

• 2x 630W [4Ω], 2x 460W [8Ω] (1kHz THD+N less than 10% CEA2006)

• 2x 500W [4Ω], 2x 370W [8Ω] (1kHz THD+N less than 1% CEA2006)

• Powerful & High Efficiency Class-D Amplifier

• 12 Line Inputs (8 mono + 4 stereo)

• High-Z input (channel 4) to connect guitars or basses directly

• 1-Knob Master EQ™

• Onboard Feedback Suppressor

• Comprehensive, professional 24 different effects

• Metal chassis for extended operation and robustness

• Large handles for extreme portability and protection

• Universal power supply eliminates concern on power fluctuations

• Optional rack-mount kit available

 

 

Specs.

Outline

I/OInputsTOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)

Phantom power+48 V

OutputsSPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]

Control and othersFOOT SWITCH : Effect Mute on/off

BusStereo: 1, AUX: 2 (Including FX)

Input Channel FunctionPAD30 dB (CH1-4)

Hi-ZSupported (CH4)

HPF80 Hz, -12 dB/oct. (CH1–3)

COMP1-knob COMP (CH1–4)

EQ HIGH10 kHz +15 dB / -15 dB (Shelving)

EQ MID2.5 kHz +15 dB / -15 dB (Peaking)

EQ LOW100 Hz +15 dB / -15 dB (Shelving)

On-board processorsDSPSPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ

On-board amplifiersMaximum output power @4ohms1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W

Maximum output power @8ohms1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W

Level Meter2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)

General specifications

Frequency responseInput to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz

Total harmonic distortionInput to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)

Hum & noise levelEquivalent input noise-117 dBu (Noise is measured with A-weighting filter)

Residual output noiseInput to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)

Crosstalk-85 dB (1 kHz, Measured with 1 kHz band pass filter)

Protection circuitLoad protectionDC-fault

Amplifier protectionOver heat protection, Over current protection, Integral power protection

Power supply protectionOver heat protection, Over current protection

Power requirementsAC 100-240V, 50Hz/60Hz

Power consumption42 W (Idle) / 210 W (1/8 Power)

DimensionsW465 mm (18 5/16")

H308 mm (12 1/8")

D325 mm (12 13/16")

Net weight9.5 kg (20.9 lbs)

AccessoriesOwner’s Manual, Technical Specifications, AC power cord (2.5 m)

OptionsFoot switch: FC5, Rack-mount brackets: RK-EMX7

OthersOperating Temperature : 0 to +40℃

(0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω All level controls are at their maximum position if not specified.)

 

Input Characteristics

Input JackMIC/LINEHi-ZActual Load ImpedanceFor Use with NominalInput LevelConnector

Sensitivity *1Nominal Level (▼ Position) *2Max. Before Clip

CH 1–4XLRMIC-3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)Combo jack *3 (Balanced)

LINE--30 dBu (24.5 mV)-13 dBu (173 mV)+15 dBu (4.36 V)

PhoneMIC-8 kΩ600 Ω Lines-50 dBu (2.45 mV)-33 dBu (17.3 mV)-5 dBu (436 mV)

LINE--20 dBu (77.5 mV)-3 dBu (548 mV)+25 dBu (13.8 V)

CH 4 (Hi-Z)PhoneMICON1 MΩ10 kΩ Lines-50 dBu (2.45 mV)-33 dBu (17.3 mV)-5 dBu (436 mV)Phone jack *4 (Unbalanced)

LINE-20 dBu (77.5 mV)-3 dBu (548 mV)+20 dBu (7.75 V)

CH 5/6, 7/8XLR--3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)XLR-3-31 *5 (Balanced)

Phone10 kΩ600 Ω Lines-20 dBu (77.5 mV)-3 dBu (548 mV)+25 dBu (13.8 V)Phone jack *4 (Unbalanced)

CH 9/10, 11/12XLR--3 kΩ50–600 Ω Mics-60 dBu (0.775 mV)-43 dBu (5.48 mV)-15 dBu (138 mV)XLR-3-31 *5 (Balanced)

Pin10 kΩ600 Ω Lines-8 dBu (316 mV)+10 dBu (2.45 V)+25 dBu (13.8 V)RCA pin (Unbalanced)

CH 11/12Mini jack--10 kΩ600 Ω Lines-8 dBu (316 mV)+10 dBu (2.45 V)+25 dBu (13.8 V)Stereo mini jack *6 (Unbalanced)

(0 dBu = 0.775 Vrms)
*1 Sensitivity is the lowest level that will produce an output of +4 dBu (1.228 V) or the nominal output level when the unit is set to maximum gain. (All level controls are at their maximum position.)
*2 Level controls setting : Channel level controls are at their t position. Master level controls are at their maximum position.
*3 1&Sleeve = GND, 2&Tip = HOT, 3&Ring = COLD
*4 Tip = Signal, Sleeve = GND
*5 1 = GND, 2 = HOT, 3 = COLD
*6 Tip = LEFT, Ring = RIGHT, Sleeve = GND
 

Output Characteristics

Output JackActual Source ImpedanceFor Use with NominalOutput levelConnector

NominalMax. Before Clip

STEREO OUT L, R600 Ω10 kΩ Lines+4 dBu (1.228 V)+20 dBu (7.75 V)Phone jack *1 (Impedance balanced)

AUX SEND 1, 2600 Ω10 kΩ Lines+4 dBu (1.228 V)+20 dBu (7.75 V)Phone jack *1 (Impedance balanced)

REC OUT L, R600 Ω10 kΩ Lines-10 dBV (0.308 V)+18 dBV (7.75 V)RCA pin (Unbalanced)

(0 dBu = 0.775 Vrms 0 dBV = 1.00 Vrms)
*1 Tip = HOT, Ring = COLD, Sleeve = GND
 

Speaker Output Characteristics

Output JackActual Source ImpedanceFor Use with NominalOutput levelConnector

1 kHz THD+N < 1% (CEA2006)1 kHz THD+N < 10% (CEA2006)

SPEAKERS A, B< 0.1 Ω4 Ω Speakers600 W710 WspeakON NL4 *1 Phone jack *2

8 Ω Speakers400 W500 W

(0 dBu = 0.775 Vrms)
*1 1+ = Positive, 1- = Negative
*2 Tip = Positive, Sleeve = Negative